Pis, smart-home hubs and KVMs
Does the Raspberry Pi 5 (8 GB) fit a 10-inch rack?
Yes. The Raspberry Pi 5 (8 GB) sits on a shelf in a 10-inch rack and takes 1U. At 85 mm wide and 56 mm deep it fits all 17 frames here without sticking out the back.
Opens a 2U PrintableRacks R1 (ours) at 260 mm deep with the Raspberry Pi 5 (8 GB) on a printed 1U shelf. Opening it swaps out the rack on screen; the builder keeps your previous rack so you can restore it.
Key facts
- The Raspberry Pi 5 (8 GB) is 85 mm wide, 20 mm tall and 56 mm deep.
- It sits on a shelf and needs 1U in a 10-inch rack, whose opening is 222 mm wide.
- It fits 17 of the 17 frames in the PrintableRacks planner without sticking out the back.
- A frame needs at least 56 mm of usable depth to hold it without an overhang.
- Its typical power draw is 5 W and it weighs 0.1 kg.
Bare board with active cooler. Needs a 27 W USB-C supply to run USB devices at full power.
Find the Raspberry Pi 5 on Amazon for Raspberry Pi 5 (8 GB) (opens Amazon)
As an Amazon Associate we earn from qualifying purchases.
Which frames does the Raspberry Pi 5 (8 GB) fit?
Fits 17 frames without sticking out. Each frame is checked at the height and depth that suit the Raspberry Pi 5 best, on the shelf named.
- PrintableRacks R1Fits
- PrintableRacks R2Fits
- PrintableRacks R3Fits
- PrintableRacks R4Fits
- PrintableRacks R5Fits
- Microlab 2Fits
- HomeRackerFits
- DeskPi RackMate T0Fits
- DeskPi RackMate T0 PlusFits
- DeskPi RackMate TTFits
- DeskPi RackMate T1Fits
- DeskPi RackMate T1 PlusFits
- DeskPi RackMate T1/2 Plus 6UFits
- DeskPi RackMate T2Fits
- DeskPi RackMate TL1Fits
- StarTech 12U 4-Post Open FrameFits
- StarTech 12U Desktop RackFits
What should the Raspberry Pi 5 (8 GB) sit on?
- Printed 1U shelfPrint
- Microlab 2 shelf modulePrint
- HomeRacker 1U shelfPrint
- DeskPi 1U rack shelf (DP-0031)Buy
- DeskPi T2 0.5U rack shelfBuy
- 19-inch 1U cantilever shelfBuy
As an Amazon Associate we earn from qualifying purchases.
Questions about the Raspberry Pi 5 (8 GB)
How many U does the Raspberry Pi 5 (8 GB) need in a 10-inch rack?
1U on a plain shelf. It is 20 mm tall, and the planner adds the 4 mm shelf plate and 2 mm of clearance, which rounds up to 1 rack units of 44.45 mm.
Is a 200 mm deep rack deep enough for the Raspberry Pi 5 (8 GB)?
Yes. It is 56 mm deep, which leaves 144 mm behind it in a 200 mm frame such as the DeskPi RackMate T1.
Does the Raspberry Pi 5 (8 GB) fit a PrintableRacks frame?
It fits all five of our frames without sticking out. Our frames are first drafts: nobody has printed or load-tested one yet.